| Featured Items |
 |
| |
|
|
| The following items are featured during June |
| |
| Stationary Engines |
| Reeves 2000 have an extensive range of stationary engines. Ranging
from the very simple Popular range of which there are four variations enabling
the beginner to excercise his machining skills, to the more advanced Triple
Expansion. Details of some of these can be seen below. We do however have
a more extensive range, which are not listed below. Please contact us if
you cannot find what you are looking for. |
| |
|
|
| |
|
Popular Oscillating Engines
These unmachined sets of castings include drawings, screws and construction
materials. Cylinders 3/8" bore x 1/2 stroke.
| Reference |
Description |
| 35/072 |
POPULAR. Vertical Single Cylinder |
| 35/073 |
POPULAR. Vertical Vee Twin Cylinders |
| 35/074 |
POPULAR. Vertical Vee Four Cylinders |
| 35/110 |
BOILER DRAWINGS RV24, for POPULARS |
|
View large image |
| top |
|
|
| |
|
Unicorn
By Edgar T. Westbury. Single Cylinder horizontal Mill engine with governor.
Described in Model Engineer Vol. 109
| Reference |
Description |
| 35/052 |
Drawings (1 sheet) M12 |
| 35/053 |
Set of 24 Castings |
| 35/054 |
Set of Machined Gears |
|
View large image
| Specifications |
| Length: |
10 1/2" |
| Height: |
6" |
| Width: |
4 1/2" |
| Cylinders:
|
3/4" b x 1/4" str |
| Flywheel Dia:
|
5 7/16" |
|
| top |
|
|
| |
|
Perseus
By Edgar T. Westbury. Similar to Unicorn but easier to build. Ideal for
school projects. Described in Model Engineer Volumes 115-116
| Reference |
Description |
| 35/062 |
Drawings (1 sheet) M20 |
| 35/063 |
Set of 17 Castings |
|
View large image
| Specifications |
| Length: |
8" |
| Height: |
4" |
| Width: |
4" |
| Cylinders:
|
3/8" b x 1" str |
| Flywheel Dia:
|
4" |
|
| top |
|
| |
|
Trojan
By Edgar T.Wesbury. Vertical Single Cylinder engine with slide valves, slip
eccentric reversing. Described in M.E. vol. 100, "Utility Steam Engines".
| Reference |
Description |
| 35/212 |
Drawings (1 sheet) M6 |
| 35/214 |
Set of 12 Castings |
|
View large image
| Specifications |
| Length: |
3" |
| Height: |
4 1/4" |
| Width: |
2" |
| Cylinders:
|
5/8" b x 5/8" str |
|
| top |
|
|
| |
|
|
Triple Expansion
A design by O.B. Bolton, typical of marine practice, having surface condenser
and air pump. Described in Model Engineer Vols 155-157 by John Bertinat.
Suitable for boats in excess of 4 1/2'
| Reference |
Description |
| 36/002 |
Drawings (5 sheets) M1 |
| 36/003 |
Set of 47 Castings |
| 36/004 |
Gears 40-1 ratio |
|
View large image
| Specifications |
| Length: |
12" |
| Height: |
9 3/8" |
| Width: |
8" |
| Cylinders:
|
7/8"x1 1/4" x1 3/4" bores x
1 1/4" stroke |
|
| top |
|
|
| |
|
Marcher
By Edgar T.Wesbury. Vertical Single Cylinder Engine with slide valves, slip
eccentric reversing. Described in M.E. vol. 100, "Utility Steam Engines".
A marine engine ideal for small boats up to a 3' beam
| Reference |
Description |
| 37/141 |
Drawings (2 sheets) M75 |
| 37/142 |
Set of 17 Castings |
| 37/143 |
Pump Drive Gears |
|
View large image
| Specifications |
| Cylinders:
|
7/16" b x 7/16" str |
|
| |
|
|
| |
|
Tinker
A Slide Crank Feed Pump Engine by John Bertinat.
| Reference |
Description |
| 37/171 |
Drawings (9 sheets) RV21 |
| 37/172 |
Set of 12 Castings |
|
View large image
| Specifications |
| Cylinders:
|
3/4" b x 1" str |
|
| top |
|
|
| |
|
Vulcan
A non condensing Beam Engine by Edgar T.Westbury with "A" Frame
type of construction. described in Model Engineer Vols. 111-112
| Reference |
Description |
| 35/002 |
Drawings (1 sheet) M17 |
| 35/003 |
Set of 26 Castings |
| 35/004 |
Alloy Bedplate |
|
View large image
| Specifications |
| Length: |
13" |
| Height: |
12" |
| Width: |
5 1/8" |
| Flywheel Dia:
|
8 3/4" |
|
| top |
|
|
| |
|
Lady Stephanie
A "Tubial Cain". Asix Column Beam Engine of delicate proportion, suitable
for the smaller lathe user. See Engineering in Miniature 1981
| Reference |
Description |
| 35/022 |
Drawings (8 sheets) RV50 |
| 35/023 |
Set of 16 brass and iron castings including M.S. bed plates |
| 35/024 |
Set of Machined Govenor Gears |
| 35/026 |
Etched Cabinet Sides |
|
View large image
| Specifications |
| Length: |
8" |
| Height: |
8" |
| Width: |
2 1/2" |
| Flywheel Dia:
|
5 1/2" |
|
| top |
|
|
